Meet BERT. Your Energy Control Freak. 484-690-382

The Bert® 220I 

Download Bert 220I PDF Product Sheet — Download Bert 220I Specs

Powerful Control for Larger Loads

Bert 220IIf your facility uses higher voltage devices such as air conditions, water heaters and other larger devices, then the Bert® 220 Inline is the measurement and control solution you’ve been looking for. Larger loads mean larger savings, but also require more powerful solutions.  The Bert 220I can control a load up to 250- Volts/20 Amp circuit. Since its part of the Bert® Plug Load Management System, these larger devices can be scheduled and controlled at the same time using the same application as the 110 volt members of the Bert® family.

  • Measure energy use with Bert’s real-time measurement features.
  • Analyze energy use, establishing optimal schedules and documenting savings.
  • Control plug based devices in mass throughout your facility.

The Plug Load Problem

Studies show that plug based load is a large and growing source of energy use estimated at 20% of energy use for offices and at 25% of energy use for schools. Yet many schools, offices and retail locations close for nearly as many hours per year as they are open.  Bert® provides the simple, sophisticated tools to easily turn equipment on when buildings are occupied and off when they’re not.

BertWifiHow Bert® Works

Each Bert® contains a microprocessor that can communicate with our Bertbrain application software using your WiFi network. Bert® can be scheduled individually or in groups thus allowing you to set schedules that mirror the actual operating hours of your facility and easily modify schedules throughout the year.

220  Volt Applications

ACFor facilities with a large number of higher voltage applications, such as window air conditioners, water heaters or other heavy equipment the Bert® 220 I (Inline) is ideal.  The unit can be installed on any circuit up to 250 Volts/ 20 Amps. Since the unit is wired into the circuit, it can measure and control a single device, a group of devices or an entire circuit. The circuit can be turned on or off remotely using the BertBrain® 1000 software.

Load Shedding

Many utilities offer demand management or load shedding programs. While you may already have programs to reduce larger centralized loads such as air conditioning, you never had a cost effective way to manage smaller distributed loads until now.   The Bert® plug load management systems makes controlling distributed loads both simple and cost effective.  Just hook your water heaters, air conditioners and vending machines up to Bert.  Using our Bertbrain application you can set up a load shedding groups and schedules. Now when you have a load shedding event, with the click of a mouse you can easily turn off some or all of your plug load devices. Schedules can be created by groups of devices or type of building and you can even cycle specific buildings or devices for a preset time.

ASHRAE 90.1 and California Title 24 Code Compliance

Since, Bert® provides both measurement and control capabilities in one system, the Bert® Plug Load Management System helps commercial buildings comply with changes in the CA Title 24 2013 and the ASHRAE 90.1 2010 and 2013 Energy Codes.  Did you know the 2010 ASHRAE Code requires “Automatic Receptacle Control” for 50% of a building’s receptacles?  The 2013 ASHRAE Code requires “Electrical Energy Monitoring” meaning the receptacle circuit’s power must be recorded at least every 15 minutes and reported hourly, daily and monthly.  Similar requirements are also included in the California Title 24 2013 section titled “Electrical Power Distribution Systems”. Not only do these code changes apply to new buildings and additions, but alterations to existing buildings such as changing 10% or your lighting load. Whether you are trying to control individual outlets with the Bert® Smart Plugs or entire circuits with the Bert Inline Series, Bert® makes ASHRAE 90.1 and CA Title 24 code compliance both affordable and efficient.

The Bert® Plug Load Management System

The Bert® Plug Load Management System consists of the Bertbrain 1000 software application, your Wi-Fi network, and a virtually unlimited number of Berts®. By simply plugging water coolers, coffee machines, printers, copiers, etc. into the Bert® Smart Plug Series (Bert® 110, Bert® 110M and Bert® Vend) or wiring circuits with the Bert® Inline Series (Bert® 110I, Bert® 110IR and  Bert® 220I) you can remotely measure, analyze and control all of your receptacles and circuits. Bert® runs on the existing Wi-Fi network so all devices can be remotely controlled in mass.  Each building can have a unique schedule, thus turning equipment off during nights, weekends and holidays when buildings are unoccupied. The Bert Plug Load Management System installs quickly so energy savings are immediate and payback is 1 to 2 years.